Canon TS9160 Driver, Wifi Setup, Manual, App & Scanner Software Download

Canon TS9160 Driver, Scanner Software Download, App, Wireless Setup, Printer Manual, Driver Install For Windows, Mac – Canon TS9160 driver software is a type of system software that gives life to the Canon TS9160 printer or scanner. The drivers allow all connected components You can download the manual pdf, software, firmware, and driver for Canon TS9160 for free.

With Canon TS9160 driver software installed on your PC, You have full access and the option for using Canon TS9160 features. Without the proper drivers, the OS would not appoint any kind of job. If you have the Canon TS9160 and you are seeking drivers to connect your device to the computer, you have come to the right website. It’s effortless to download the Canon TS9160 driver, just simply click the “Download Link” below.

This Canon TS9160 printer can print up to 4800 x 1200 dpi with ChromaLife 100 inks, the Pixma TS9160 is, according to its datasheet, capable of printing a 10 x 15 cm photo in about 17 s. However, it takes 28 seconds to write our reference photo in this format, and 1 minute 2 seconds to print an A4 photo. They are 12 seconds gained in 10 x 15 cm compared to the TS8050, and 7 seconds in A4. Again, small improvements over the Pixma from previous generations. But as always in the photo, ultimately, we place a lot more importance on rendering quality than bit rates. As expected, the representation is excellent.

However, if we stick to the analysis of color drift, the TS9160 is slightly less faithful than the TS8050, and even like the Canon MG7750. The delta E measured here is 5.8, compared to 5 for the TS8050 and 5.3 for the MG7750. On the other hand, the surveys are relatively uniform, and the set remains one of the best in the store. In terms of sharpness, the photos printed by this printer are perfect. At the office, in this range, Canon retains its strengths and weaknesses. In terms of data rates, the TS9160 is delivered for ten pages per minute in color and 15 ppm in black and white.

Read also: Canon TS9140 Setup Instructions, Driver, Software & User Manual Download.

We found correct bit rates of 6.2 ppm in black and white and 12.5 ppm in color in our test documents. During the two years, there was an increase over the TS8050, which had bit rates of 5.7 and 7.8 ppm, respectively. Thus, we get excellent color performance, but in black and white, the printer is still penalized by the many pauses necessary to dry the ink to avoid overflow or transfer. Finally, in the office, the prints are of excellent quality: contrasting, clear, and precise, including text on a white or colored background or perfectly restored gradations and spot colors. On and ready to print, the Canon Pixma TS9160 takes 8 seconds to publish its first page in black and white.

Canon TS9160 Driver Compatible With:

Windows 10 64-bit, Windows 10 32-bit, Windows 8.1 64-bit, Windows 8.1 32-bit, Windows 8 64-bit, Windows 8 32-bit, Windows 7 64-bit, Windows 7 32-bit, Linux (64-bit), Linux OS (32-bit), Macintosh, Mac OS X 10.15, Mac OS X 10.14, Mac OS X 10.13, Mac OS 10.12, Mac OS X 10.11, Mac OS X 10.10, Mac OS X 10.9, Mac OS X 10.8.

How to Install Canon TS9160 Driver for Windows

1. Download the file in the download section.
2. Double-click the downloaded file.
3. Wait a moment to allow the installer verification procedures.
4. Follow the installation instructions to finish.
5. You can read it entirely in the Canon TS9160 User Guide PDF that you can also download here.
6. Canon TS9160 Driver for Windows successfully installed.

How to Install Canon TS9160 Driver for Mac

1. Download the file in the download section.
2. Double-click the downloaded .pkg file.
3. Wait a moment to allow the installer verification procedures.
4. Follow on-screen instructions to install until it finished.
5. You can read it entirely in the Canon TS9160 User Manual PDF that you can also download here.

How to Install Canon TS9160 Driver for Linux

1. Install the archived file (tar.gz, etc.) of the downloaded package as an administrator, following the manual.
2. For more info on how to install and use the software, read the instruction manual that you can get in the download section.

Canon TS9160 Wireless Setup

This Canon TS9160 wireless setup tutorial shows you how to connect a compatible Canon printer to your wireless network using the Wifi Protected Setup (WPS) pushbutton method. It will allow you to print from a computer in the same network area without having to connect the printer to your computer. Not all Canon printers have wireless functionality, so make sure your printer can connect to the Internet before continuing.

1. Unpack your printer.
2. Follow the Canon TS9160 setup instructions to remove the package.
3. Plugin the power cord, turn on the printer, and install the print cartridges. Allow the printer to perform its startup procedure, including printing an alignment page (if applicable).
4. Your printer and wireless router must support the WPS pushbutton mode. See the manuals for your printer and wireless router.
5. The wireless router must have a physical WPS push button.
6. Your network must use WPA or WPA2 security. Most WPS wireless routers will not connect using the WPS method if using WEP or without protection.
7. Most WPS wireless routers will not connect using the WPS method if you use the manufacturer’s default settings for the name of the network and without security.
8. To connect your wireless printer to your wireless router using WPS, start the WPS pushbutton mode on your printer.
9. For instructions on how to start WPS on your printer, see your printer’s manual.
10. Within 2 minutes, press the WPS pushbutton on your router.

Canon TS9160 Driver, Software Download & Manual

Download the TS9160 driver at the download section. Follow the instructions for install to finish. Refer to the Canon TS9160 User Guide PDF that you can also download here.